Totoku MDT947B-1A Monitor Replacement,
9 In Mono CRT Monitor

Model QES1508-058 8.4 In LCD replaces Totoku MDT947B-1A, 9 In mono CRT Monitors used in Fanuc 0, 0-A, 0-B Series Control Panels.

---

Totoku MDT947B-1A Monitor Replacement, 9 In Mono CRT Monitor

Need a Totoku MDT947B-1A Monitor Replacement, LOOK NO FURTHER, our QES1508-058 is the perfect upgrade.  This model also works for the Fanuc A61L-0001-0092 and Toshiba D9MR-10A.  The rugged, open-frame steel chassis of this high-quality 8.4" LCD display is designed to drop right into the mounting holes of the original 9-inch monochrome CRT, making it unnecessary to replace or make expensive modifications to the original CRT monitor chassis. The QES1508-058 accepts the TTL video signals used in FANUC 16, 18, and 20 Series CNC Machine controls with no need for signal adapters of any sort.  This unit has been optimized to operate at the FANUC monitor timing but also operates with a variety of other TTL legacy monitor timing as well. Our QES1508-058 is a high-performance, 8.4-inch Active Matrix TFT LCD monitor with an LED Backlight featuring 600:1 contrast ratios and 450 nits brightness, making it an excellent replacement monitor for your legacy 9-inch Totoku MDT947B-1A Mono CRT monitor. CRT monitors can be unreliable, and in the event of failure, your CNC Controller can be down for days at a time when you need it the most. If and when this happens, installing an LCD upgrade is the fastest and most reliable way to get your machine controller up and running.  If you are uncomfortable with the prospect of upgrading your CRT Totoku Electric MDT-948B-3A yourself, Dynamic Displays can perform the retrofit at no cost to you. Just give us a call at 715-835-9440 or email us at [email protected]. Equivalent Models: D9MR-10A, D9MR10A, KF-M7099Y, KFM7099Y, MDT947B-1A, MDT947B1A, MDT947B-1B, MDT9471B, D9MR-10A, D9MR10A

FOLLOW THIS LINK TO SEE A SEARCHABLE LIST OF INDUSTRIAL REPLACEMENT MONITORS